NATIONAL SAFETY APPAREL KIT2CV08B Arc Flash 8cal Kit Complete No Tax!

NATIONAL SAFETY APPAREL KIT2CV08B Arc Flash 8cal Kit Complete  No Sales Tax and free shipping direct from NSA factory to you in sealed carton  Arc Rating: 8 cal/cm²  Khaki FR Sateen  ASTM F1506  OSHA 29 CFR 1910.269  NFPA 70E-2015 for Arc Flash  CSA Z462-15 for Arc Flash (Canada)

• Faceshield Bag

• Faceshield with Chin Cup
• Glove Bag
• Leather Protectors
• Rubber Voltage Gloves
• Safety Glasses
• Standard Size Gear Bag
• UltraSoft® Balaclava
• UltraSoft® Coverall
• Testing and Inspection. Gloves and sleeves must be electrically tested before being issued for use. They must also be visually inspected and gloves need to be air tested for any possible defects (for example, cuts, holes, tears, embedded objects, changes in texture) before each day's use and whenever there is a reason to believe they may have been damaged. Best practice is to inspect PPE and air test the gloves and sleeves before each use. [See 1910.137(b)(2)].

  • Insulating equipment may not be used if any of the following defects are present: holes, tears, punctures or cuts, ozone cutting or ozone checking, embedded foreign objects, texture changes, including swelling, softening, hardening, or becoming sticky or inelastic, and any other defect that damages the insulating properties. [See 1910.137(b)(2)(iii) and ASTM F1236-96, Standard Guide for Visual Inspection of Electrical Protective Rubber Products].
     
  • Insulating equipment failing to pass inspection must be removed from service and may not be used by workers.
  • Protector Gloves and Storage. To ensure worker safety and the integrity of the gloves and sleeves, insulating gloves need to be worn along with protector gloves (such as leather), and both insulating gloves and sleeves need to be stored properly when not in use. Proper storage means that gloves must not be folded and need to be kept out of excessive heat, sunlight, humidity, ozone, and any chemical or substance that could damage the rubber. [See 1910.137(b)(2)].
    
    

    The proposed rule recognizes Class 0 and 00 gloves. See the proposed rule for additional information.

    For additional information on the use of insulating gloves and sleeves, see ASTM F496, Standard Specification for In-Service Care of Insulating Gloves and Sleeves, and ASTM F1236-96, Standard Guide for Visual Inspection of Electrical Protective Rubber Products. Additionally, see 1910.137(b)(2).
  
  

  Product Code: KIT2CV08B_ _ _ _